規格參數:
Specifications and Parameters | |||
Item | Content | Unit | Parameter |
Travel | |||
Left-Right Travel (X) | mm | 710 | |
Front-Back Travel (Y) | mm | 400 | |
Up-Down Travel (Z) | mm | 550 | |
Spindle Head to Worktable Distance | mm | 150—700 | |
Worktable | |||
Worktable Length | mm | 900 | |
Worktable Width | mm | 400 | |
Worktable Load Capacity | Kg | 650 | |
T-slot | Specification | mm | 3*18 |
Center Distance | mm | 140 | |
Spindle | |||
Taper | BT40 | ||
Distance from Center to Guideway | mm | 460 | |
Spindle Speed | rpm | 50--6000 | |
Rated Torque | N.m | 25.4 | |
Maximum Torque | N.m | 71 | |
Rated Power | Kw | 4 | |
Drive System | Direct-Drive | ||
Accuracy | |||
Positioning Accuracy | mm | ±0.02 | |
Repeatability | mm | ±0.01 | |
Axis Motor | |||
Rated Power | Kw | XYZ:2.3 | |
Rated Torque | N.m | XYZ:15 | |
Maximum Torque | N.m | 45 | |
Feed Rate | |||
X/Y/Z Maximum Rapid Traverse | mm/min | 8000 | |
X/Y/Z Maximum Cutting Speed | mm/min | 6000 | |
Overall Dimensions | mm | 2450X2485(2035)X2427 |
項目 | 內容 | 單位 | 參數 |
行程 | 左右行程（X） | mm | 710 |
前后行程（Y） | mm | 400 | |
上下行程（Z） | mm | 550 | |
主軸頭端面到工作臺面 | mm | 150—700 | |
工作臺 | 工作臺面長 | mm | 900 |
工作臺面寬 | mm | 400 | |
工作臺承重 | Kg | 650 | |
T型槽 | 規格 | mm | 3*18 |
中心距 | mm | 140 | |
主軸 | 錐度 | BT40 | |
軸心至導軌面距離 | mm | 460 | |
主軸轉速 | rpm | 50--6000 | |
額定扭矩 | N.m | 25.4 | |
*大扭矩 | N.m | 71 | |
額定功率 | Kw | 4 | |
驅動系統 | 直連 | ||
精度 | 定位精度 | mm | ±0.02 |
重復精度 | mm | ±0.01 | |
軸向電機 | 額定功率 | Kw | XYZ:2.3 |
額定扭矩 | N.m | XYZ:15 | |
*大扭矩 | N.m | 45 | |
進給速度 | X/Y/Z*大快移速度 | mm/min | 8000 |
X/Y/Z*大切削速度 | mm/min | 6000 | |
外形尺寸 | mm | 2450X2485(2035)X2427 |
